Friday, February 4, 2011

First Friday Tutorial

The first Friday of the month is when we give you a free tutorial. Nothing huge, just a tip you might find helpful :)  Today's tutorial came from receiving a cry for help to create post earrings. This is actually quite simple and if you've never done them before you'll be wondering why and I see lots of post earrings in your future :)  Usually we only leave our tutorials up for the weekend but this one will stay so you can refer back to it :)

Post Earrings
Burying the post

String 5 beads...I'm using 11/0 seed beads here.
Go back through all five beads and tie the two ends of the thread together so the beads form a ring. Knotting makes sure the ring stays tight. Slip the post of the earring through the center of the ring.

Work a row of peyote with one bead in each stitch, finish off your threads.  

Make a second ring exactly the same but do not finish the ends.
Place this ring on top of the disc of the post so that the disc is sandwiched between the two bead rings. Stagger the edge beads so that the edge bead of the top ring lays between the edge beads of the lower ring. Zip the two rings together through the outside beads.

This is what it will look like from the side :)

Work a row of peyote into the top ring adding 2 beads per stitch. (10 beads)
Step up through the first 2 beads.

To reinforce the attachment of the two bead rings, turn the work over and pass the thread though the single bead on top of the two.

Pass the thread back through the 2 beads.  
Weave through to the next 2 beads and repeat the last two steps.
Continue around until all five sets of 2 beads have been worked in this manner.

Your earring should now look like this. At this point if you don't feel it is secure enough you could add a drop of bead glue into the center of each ring so the post disc is glued from both sides.

And here is your burried post with a base of beads ready to add embellishments or whatever your muse directs you :)


I just changed from circular peyote to tubular peyote to create a home for a pearl...as soon as the tubular was high enough to reach the holes in the pearl I added the pearl. I passed the thread through the pearl, through the opposite bead and back through the pearl. I then worked another two rows of peyote and finished with one row using 15/0 seed beads.


So there you go...a simple technique for your beading arsenal.
We hope you enjoy it and get much use out of it...and as it's a basic thing you get to incorporate it into things you sell :)

13 comments:

  1. Sorry for the delay folks....I had this scheduled to post automatically but I managed to schedule it in English dates which meant I actually scheduled it for April 1st instead of January 4th. One would think I'd have it down after 26 years! Sheesh!

    ReplyDelete
  2. Thanks - great tutorial! customers have been asking for post earrings, and now I have a good method for creating them.
    Mary Alexander

    ReplyDelete
  3. What a great tutorial! I can't wait to try it!

    ReplyDelete
  4. I had this date marked on my calendar! This is a great tutorial, thanks so much!

    ReplyDelete
  5. will share with some of my friends who are new to beading..thanks for posting ;o)

    ReplyDelete
  6. What a fantastic idea. I love how you come up with these techniques - like your bead encased snaps!

    Thanks for sharing!

    Karyn

    ReplyDelete
  7. You've inspired me to start beading around those tiny little magnetic clasps to make my own to match my work. Great tutorial!

    ReplyDelete
  8. You're welcome, Ladies, Have fun with it :)

    ReplyDelete
  9. Thanks, Mikki. Can't wait to try this technique!
    And the fact that it's going to stay on the blog makes it even better!

    ReplyDelete
  10. Mikki, thanks for leaving this up! I thought it was neat at the time, but just now have a request for post earrings. I look forward to trying it.

    ReplyDelete